Lot of electrical terminals - Insulated connector heat-shrinkable sleeve welding sleeve

Set of electrical lugs - Heat-shrink tubing insulated connector with solder sleeve.

Section 0.2mm - 0.5mm / White (26-22 AWG)

Section 0.5mm - 1.5mm / Red (22-18 AWG)

Section 1.5mm - 2.5mm / Blue (16-14 AWG)

Section 4mm - 6mm / Yellow (12-10 AWG)

Polyolefin tubing on the outside and hot melt adhesive on the inside.

Prevents corrosion and provides a tight seal.

Slip a wire in the sheath, make a splice between the two wires, position the junction at the level of the sleeve.

Use a heat gun (or dead flame - lighter) to reduce the liner melt the solder sleeve and remove the spaces between the lug and the wires.